Cyrus DAC X Signature, Инструкция пользователя, Страница: 20 / 23

Cyrus DAC XP Signature User Instructions
18
seTTINg uP (dAc XP sIgNATuRe)
There are many configuration options available in the setup menu to
customise the DAC XP Signature to best match each individual system.
To enter the menu system, press the front panel SETUP key
f . Turn the
Rotary control e to scroll through the options available on the display.
Press the Rotary control e to select the option displayed. During the
setup sequence, you can move to the next or previous step by pressing
the Input up or down buttons.
Press the SETUP
f key to exit setup and save any changed settings. Note
that the setup sequence will exit, saving any changed settings after 10
seconds of inactivity or after the last option ‘Set the sensitivity for input
8’ has been completed.
The setup menu options are shown here –
Phase adjust
Normal
Phase
This menu option sets the audio phase for the DAC. The factory setting is
normal. Some listeners may prefer the inverted setting with their systems
or for when playing particular recordings.
filter adjust
Fast Roll-off
Digital Filter Response
This menu option gives two settings for the digital filtering of the DAC
stage. Choose your preference of Fast or Slow roll-off by auditioning
some of your favourite tracks with each setting.
display mode
Small Input Names
Display Mode
There are three modes of display operation.
The ‘small input’ setting will show a three line display with the volume
reading at the top of the display, the selected input in the display centre
and the current sample rate/lock status at the bottom.
The ‘large input’ setting will show a two line display with the volume
reading at the top and a larger input legend below.
The ‘large volume’ setting will display large volume characters at the
bottom of the screen with the bargraph above.
Digital Filter
Display Mode
Name Input 1
Choose a name for input 1 from the name list
Choose a name for input 2 from the name list
Choose a name for input 3 from the name list
Choose a name for input 4 from the name list
Choose a name for input 5 from the name list
Choose a name for input 6 from the name list
Choose a name for input 7 from the name list
Choose a name for input 8 from the name list
Set the sensitivity for input 7
Set the sensitivity for input 8
Name Input 2
Name Input 3
Name Input 4
Name Input 5
Name Input 6
Name Input 7
Name Input 8
Trim Input 7
Trim input 8
Storing settings Save settings and exit setup
Phase adjust Select normal or inverted
Select fast or slow roll off
Select large input, small input or large volume
Setup
Input names
Input name
Input 1
DVD
< >
When the DAC XP Signature leaves the factory, the input names are set
to correspond to the rear panel connections, for example Input 1 will
display as Input 1.
The name of any input may be changed to a choice from the following
list-
No source (off)* •
LaserDisc, DVD, DVD 2, DVD-A, CD, CD 2 •
Linkserver, Linkport •
Jukebox, Phono •
Tuner, DAB, TV, AV, Cyrus AV*, Satellite, Satellite 2, Cable •
Video, VCR, VCR 2, Tape, MiniDisc, DAT •
PC, Games, Keyboard, Aux, AV Direct*, Stream X. •
To change the names of the inputs, we recommend making a list of each
input number with your preferred name from the choices above before
setting the names.
There are three special function input names marked *.
‘No source’ is used to name inputs which have no source connected to
them. These input numbers will not then appear in the input selector
sequence.
‘Cyrus AV’ is reserved for the connection of Cyrus surround sound
decoders. When a Cyrus surround decoder is connected to an analogue
input named ‘Cyrus AV’ the DAC XP Signature will check the system
for the presence of a Cyrus surround decoder and, if found, lock out its
volume control at a precise setting. Normal volume operation will be
restored when any other input is selected.
‘AV Direct’ is reserved for the connection of non-Cyrus surround decoders
to an analogue input. This input name must only be used for this purpose
as the volume level will lock to a very high setting (-6dB) when AV Direct
is selected.
Input trims
Offset
Input 7
+4dB
It is possible to adjust the sensitivity of analogue inputs 7 and 8 by
selecting the appropriate trim option from the menu. This enables the
volume level when playing low or high output source components such
as tape decks or tuners to be equalised with the digital system sources.
Restoring factory settings
You can also restore all configuration options to the initial default settings
that were applied at the factory.
NOTE: This operation is not reversible.
To restore factory settings, disconnect mains power from the unit. Now
re-connect mains power while holding down the Standby key.