Cyrus CD i, Инструкция пользователя

Страница: 6 / 18

Cyrus CD i User Instructions
4
Connecting to the AC Mains Supply
Connect the socket on the AC Power cable to the AC Power
inlet
f
on the rear panel of the CD i . Now connect the cable
to a suitable AC power point.
There is no mains power switch on the
CD i . To switch off
the mains supply to the CD i remove the plug from the
wall outlet. For this reason, ensure that the plug is easily
accessible when installing the unit.
Connecting to the System Amplifier
Connect a suitable stereo RCA phono interconnect to the
audio output sockets
b
of the CD i and the corresponding
input of the amplifier or receiver. Amplifier inputs suitable
for this purpose are CD or AUX inputs.
Dual outputs are provided for convenient connection
to multiroom units or for direct connection to tape/disc
recorders etc.
dO NOT connect the
CD i to the PHONO input of the amplifier,
as this could damage your amplifier or speakers.
Connecting a Digital amplifier or External
D/A converter
The CD i provides a digital output to connect to a digital
amplifier or D/A converter. Using a digital interconnect,
connect the dIgITAL OPTIcAL
c
or DIGITAL COAXIAL
d
output to the digital input of an amplifier or D/A converter.
The DIGITAL COAXIAL connection is recommended where
this connection is available.
NOTE: The digital output of the
CD i is only compatible with
digital inputs. It is not suitable for connection to an analogue
amplifier.
Connecting a Cyrus PSX-R
The Cyrus PSX-R is a high quality regulated power supply, the
use of which will elevate your CD i into a true world-class
state-of-the-art product.
The connector fitted to the umbilical cable from the PSX-R
must be securely connected to the PSX-R socket
e
on the
rear of the CD i . When correctly fitted, the connector will
latch into the socket.
NOTe: The
PSX-R
power supply and the
CD i
will both require
connection to the mains supply.
NOTE: Connection of a
PSX-R is detected automatically, so
no internal adjustments are required.
MC-bus System Connection (Optional)
By using the MC-BUS connection on your CD i , a highly
functional integrated system with full remote control may
be set up. This feature is usable if you own a Cyrus amplifier.
Refer to the relevant product handbook for MC-BUS wiring
instructions.