Cyrus aCA7, Инструкция пользователя

Страница: 4 / 21

Cyrus aCA7 CAUTIONS
3 English
SUPPLY VOLTAGE
Your Cyrus aCA7 pre-amplifier is set to operate from the
mains supply voltage marked on the rear of the unit.
Ensure this voltage is the same as your mains supply, i.e.
230V Products Voltage Range 220V-240V
115V Products Voltage Range 110V-120V
Consult your Mission distributor to arrange for conversion
of your Cyrus aCA7 if you move to an area with a
different mains voltage.
LOCATION
Install the Cyrus aCA7 in a well ventilated location where
it will not be exposed to high temperature or humidity.
Avoid installing the Cyrus aCA7 in a location which is
exposed to direct rays of the sun, or near hot appliances or
radiators. Placing the unit on heat-generating sources or
installing it in damp or dusty conditions will affect
performance and may result in malfunction or accident.
POSITIONING THE UNIT
The Cyrus aCA7 may be positioned either free standing or
alongside another piece of audio equipment. Never stand
the Cyrus aCA7 under another unit. This may adversely
affect the cooling of the Cyrus aCA7. Never place the unit
on any surface which may hamper normal ventilation.
PRECAUTIONS REGARDING INSTALLATION
It is important not to allow any liquid or foreign object fall
into this unit. When routing the power cord avoid running
it over or near sharp objects. Do not stand objects on the
power cord.
If the Cyrus aCA7 is not to be used for a long period of
time, unplug the unit from the mains power supply.
This unit contains no user serviceable parts.
Never remove any panels from the unit or attempt to
service the unit. In the unlikely event of failure, please
refer to qualified service personnel.
Important Note for UK Customers
The mains lead of this unit is fitted with a UK 13A Plug. Do
NOT disassemble this plug. If for any reason you remove
the plug, dispose of it safely and do not attempt to re-use it.
The wires in the mains lead are coloured in accordance with
the following code: Blue - neutral, Brown - live.
If these colours do not correspond with the coloured
markings identifying the terminals on your new mains plug:
Connect the Blue wire to the terminal which is marked with
the letter N or coloured Black.
Connect the Brown wire to the terminal which is marked
with the letter L or coloured Red.
Ensure that your equipment is connected correctly. If in
doubt, consult a qualified electrician.