Cyrus aCA7, Инструкция пользователя

Страница: 12 / 21

Cyrus aCA7 REMOTE CONTROL
11 English
Level and Balance Controls
The keys
b
are used to adjust both volume
level and channel balance.
Volume
Press to increase the volume level.
Press to decrease the volume level.
Balance
Pressing the key
1!
changes the mode of the Level
Control to that of Left/Right Balance.
When Balance mode is selected, the light ring around the
level knob will change function to work in "reverse video"
with the unlit section indicating the position of L-R
balance. In this mode, you can control the L-R balance by
up to +/-4dB as well as switching one channel off
completely when the balance is set to an extreme position.
Typical Balance indications are shown below.
To adjust Channel Balance:
Press the key
1!
to select Balance mode.
Press to move the channel balance to the Right.
Press to move the channel balance to the Left.
Press the key again to restore normal Volume mode.
If you leave the Cyrus aCA7 set to Balance, after 5 seconds
of inactivity the mode automatically reverts to indicate
volume level.
As an alternative to using the handset keys to adjust the
balance, you may use the
key to select balance mode
and then adjust the balance using the Level Control on the
front panel.
Mute
Pressing the MUTE key
1)
fades the main volume to zero.
Pressing the MUTE key again restores the volume to the
level it was at prior to selecting Mute (unless the volume
was set very high in which case the Cyrus aCA7 will
restore at a safe lower level of –15dB).
You cannot select or deselect headphones via the handset.
SYSTEM OPERATION WITH THE COMMANDER
When a Cyrus CD player, FM7 tuner and suitable
ancillary units are connected to the Cyrus aCA7,
integrated system operation is possible using the Remote
Commander handset (see page 17 for details).
Channel Balance
Normal
Channel Balance
R-CH +2dB
Channel Balance
L-CH only