Cyrus 6a, Инструкция пользователя

Страница: 13 / 25

Cyrus 6a, Cyrus 8a User Instructions
11
display mode
There are three modes of display operaion.
factory Settings
You can restore the coniguraion of your ampliier to the
factory original seings, changing the input names to those
listed above, seing the display mode to ‘small input names’
and seing all input sensiivity trim seings to 0dB.
To restore the seings, irst disconnect the power cord from
the ampliier. Hold down the setup key on the front panel
and re-connect the power cord.
The ‘small input’ seing will show
the volume reading at the top of
the display, and the selected input
in the display centre.
The ‘large input’ seing will show
a two line display with the volume
reading at the top and a larger
input legend below.
The ‘large volume’ seing will
display large volume characters at
the botom of the screen with the
bargraph above.
Input sensitivity offset
It is possible to adjust the relaive
sensiivity of individual inputs
by selecing the appropriate
trim opion from the menu. This
enables the volume level when
playing low or high output source
components such as tape decks or
tuners to be equalized between
system sources.
-27
CD
-27
-27dB
Offset
Input 6
+4dB
-27
CD