Cyrus 6a, Инструкция пользователя

Страница: 12 / 25

Cyrus 6a, Cyrus 8a User Instructions
10
CONfIgURATION
Through the setup menu you can customise your ampliier
to best match your system.
To enter the menu system, press the front panel SETUP key
f
. Turn the Rotary control
e
to scroll through the opions
available on the display. Press the Rotary control
e
to select
the opion displayed. During the setup sequence, you can
move to the next or previous step by pressing the Input up
or down butons.
Press the seTuP
f
key to exit setup and save any changed
seings. Note that the setup sequence will exit, saving any
changed seings ater 10 seconds of inacivity or ater the
last opion has been completed.
The setup menu opions are shown here –
Name Input 1 Choose a name for input 1 from the name list
Choose a name for input 2 from the name list
Choose a name for input 3 from the name list
Choose a name for input 4 from the name list
Choose a name for input 5 from the name list
Choose a name for input 6 from the name list
Set the sensitivity offset for input 1
Set the sensitivity offset for input 2
Set the sensitivity offset for input 3
Set the sensitivity offset for input 4
Set the sensitivity offset for input 5
Name Input 2
Name Input 3
Name Input 4
Name Input 5
Name Input 6
Trim Input 1
Trim input 2
Trim input 3
Trim input 4
Trim input 5
The display will show ‘Storing Settings’, then exit setup.
Setup
Display Mode Select large input, small input or large volume
Set the sensitivity offset for input 6
Trim input 6
Input names
When your ampliier let the factory, the input names are
set as shown below
Input 1 – Cd Input 5 – Input 5
Input 2 – Tuner Input 6 – Tape
Input 3 – Cyrus AV
Input 4 – Input 4
The name of any input may be changed to a choice from the
following list. Each name may be used once -
CD, DAB, Cyrus AV*, Phono, Tape 3-Head, Tape, Satellite,
Cable, iPod, MP3, DVD, Blu-ray, CD 1, CD 2, SACD, CD-R,
Linkserver, Jukebox, LaserDisc, Tuner, AV Direct*, TV, TV
1, AV, USB, Satellite 1, Cable 1, Video, VCR, PVR, Cassete,
DAT, MiniDisc, Games, Games 1, PC, Laptop, Mac, Special,
Keyboard, Aux, Stream X.
Before changing the names of the inputs, we recommend
making a list of each input number with your preferred
name from the choices above before seing the names. Each
name may only be used once. When a name is assigned to
an input it will be removed from the list for other inputs.
NOTE:- There are two special funcion input names marked *.
‘Cyrus AV’ is reserved for the connecion of Cyrus surround
sound decoders and should only be used for this purpose.
‘AV Direct’ is reserved for the connecion of non-Cyrus
surround decoders. This input name must only be used
for this purpose as the volume level will lock to a very high
seing (-6dB) when AV Direct is selected.
Choose ‘No source’ from the list to name inputs which have
no source connected to them. When named ‘No Source’,
an input number will not appear in the input selector scroll
sequence or in the Zone 2 select sequence.
In addiion, the name ‘Tape 3-Head’ will appear as an extra
opion in the naming list for Input 6.