Rev02
Cypress Envirosystems
OEM User Manual
Page 7
Product Labeling Requirements
FCC product labeling requirements stipulate an FCC label, including specific text, be
placed on the device containing the WiFi3309701 module. The product label must
include the following text and must be affixed to the exterior of the OEM’s product.
“Contains FCC ID: W3I-WIFI3309701”
Industry Canadian Regulatory Approval
Industry Canada regulatory approval typically conforms to the FCC in terms of emission
levels and other regulatory requirements. It is the position of the Industry Canada
agency that the OEM primarily responsibility for ensuring end product compliance.
Cypress Envirosystems as grantee and supplier of the module maintains responsibility
for the Modular Approved design.
Product Labeling Requirements
Industry Canada product labeling requirements stipulate that specific text be placed on
the device containing the WiFi3309701 module. The product label must include the
following text and must be affixed to the exterior of the OEM’s product. The same
information must be included in the product user manual.
“Contains IC: 8266A-WIFI3309701”
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-
003 du Canada.
Europe
Regulatory Marking
The equipment shall be marked, where applicable, in accordance with CEPT/ERC
Recommendation 70-03 or Directive 1999/5/EC, whichever is applicable. Where this is
not applicable, the equipment shall be marked in accordance with the National
Regulatory requirements.
CE Marking
The equipment shall be marked in a visible place. This marking shall be legible and
durable.
In cases where the devices are too small to carry legible marking, it is sufficient to
provide the relevant information in the user’s manual and on the product packaging.
