PSoC™ 6 Wi-Fi Bluetooth® pioneer kit guide, Document Number. 002-22677 Rev. *I
15
Introduction
P9.1
GPIO on non-Arduino
header (J2.4)
–
P9.2
GPIO on non-Arduino
header (J2.6)
–
P9.3
TRACEDATA[0]
GPIO on
non-Arduino header
(J2.8)
Populate R162 to connect to header.
P9.4
GPIO on non-Arduino
header (J2.10)
–
P9.5
GPIO on non-Arduino
header (J2.12)
–
P9.6
GPIO on non-Arduino
header (J2.16)
–
P9.7
GPIO on non-Arduino
header (J2.18)
–
P10.0
GPIO on header
compatible with Arduino
J2.1, A0
–
P10.1
GPIO on header
compatible with Arduino
J2.3, A1
–
P10.2
GPIO on header
compatible with Arduino
J2.5, A2
–
P10.3
GPIO on header
compatible with Arduino
J2.7, A3
–
P10.4
GPIO on header
compatible with Arduino
J2.9, A4
PDM_CLK
–
P10.5
GPIO on header
compatible with Arduino
J2.11, A5
PDM_DAT
–
P10.6
GPIO on non-Arduino
header (J2.13)
–
P10.7
Header J21.5
–
P11.0
FRAM CS
GPIO on
non-Arduino header
(J18.8)
Connected to primary and secondary functions
by default. Remove R175 to disconnect from
J18 and load R39 (10K) as F-RAM pull-up.
P11.1
RGB Blue LED
–
P11.2
QSPI FLASH CS
GPIO on
non-Arduino header
(J18.7)
Populate R177 to connect to J18, remove R176
to disconnect from flash.
P11.3
QSPI FLASH/
FRAM DATA3
–
Table 1-1. Pioneer board pinout
(continued)
PSoC™ 6
pin
Primary
on-board function
Secondary
on-board function
Connection details
