Cypress MB96300 Series Скачать руководство пользователя страница 2

 

Copyrights 

F

2

MC-16FX Family MB96300 Series Setup Guide, Doc. No. 002-06378 Rev. *A 

© Cypress Semiconductor Corporation, 2008-2016. This document is the property of Cypress Semiconductor Corporation 
and its subsidiaries, including Spansion LLC (“Cypress”).  This document, including any software or firmware included or 
referenced  in  this 

document  (“Software”),  is  owned  by  Cypress  under  the  intellectual  property  laws  and  treaties  of  the 

United  States  and  other  countries  worldwide.    Cypress  reserves  all  rights  under  such  laws  and  treaties  and  does  not, 
except  as  specifically  stated  in  this  paragraph,  grant  any  license  under  its  patents,  copyrights,  trademarks,  or  other 
intellectual property rights.  If the Software is not accompanied by a license agreement and you do not otherwise have a 
written  agreement  with  Cypress  governing  the  use  of  the  Software,  then  Cypress  hereby  grants  you  a  personal,  non-
exclusive,  nontransferable  license  (without  the  right  to  sublicense)  (1)  under  its  copyright  rights  in  the  Software  (a)  for 
Software  provided  in  source  code  form,  to  modify  and  reproduce  the  Software  solely  for  use  with  Cypress  hardware 
products, only internally within your organization, and (b) to distribute the Software in binary code form externally to end 
users  (either  directly  or  indirectly  through  resellers  and  distributors),  solely  for  use  on  Cypress  hardware  product  units, 
and (2) under those claims of Cypress’s patents that are infringed by the Software (as provided by Cypress, unmodified) 
to  make,  use,  distribute,  and  import  the  Software  solely  for  use  with  Cypress  hardware  products.    Any  other  use, 
reproduction, modification, translation, or compilation of the Software is prohibited. 

TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS 
OR  IMPLIED,  WITH  REGARD  TO  THIS  DOCUMENT  OR  ANY  SOFTWARE  OR  ACCOMPANYING  HARDWARE, 
INCLUDING,  BUT  NOT  LIMITED  TO,  THE  IMPLIED  WARRANTIES  OF  MERCHANTABILITY  AND  FITNESS  FOR  A 
PARTICULAR PURPOSE. To the extent permitted by applicable law, Cypress reserves the right to make changes to this 
document without further notice. Cypress does not assume any liability arising out of the application or use of any product 
or circuit described in this document.  Any information provided in this document, including any sample design information 
or  programming  code,  is  provided  only  for  reference  purposes.    It  is  the  responsibility  of  the  user  of  this  document  to 
properly  design,  program,  and  test  the  functionality  and  safety  of  any  application  made  of  this  information  and  any 
resulting product.  Cypress products are not designed, intended, or authorized for use as critical components in systems 
designed  or  intended  for  the  operation  of  weapons,  weapons  systems,  nuclear  installations,  life-support  devices  or 
systems, other medical devices or systems (including resuscitation equipment and surgical implants), pollution control or 
hazardous substances management, or other uses where the failure of the device or system could cause personal injury, 
death,  or  property  damage  (“Unintended  Uses”).    A  critical  component  is  any  component  of  a  device  or  system  whose 
failure  to  perform  can  be  reasonably  expected  to  cause  the  failure  of  the  device  or  system,  or  to  affect  its  safety  or 
effectiveness.    Cypress  is  not  liable,  in  whole  or  in  part,  and  you  shall  and  hereby  do  release  Cypress  from  any  claim, 
damage,  or  other  liability  arising  from  or  related  to  all  Unintended  Uses  of  Cypress  products.    You  shall  indemnify  and 
hold  Cypress  harmless  from  and  against  all  claims,  costs,  damages,  and  other  liabilities,  including  claims  for  personal 
injury or death, arising from or related to any Unintended Uses of Cypress products. 

Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, PSoC, CapSense, EZ-USB, F-RAM, 
and  Traveo  are  trademarks  or  registered  trademarks  of  Cypress  in  the  United  States  and  other  countries.    For  a  more 
complete  list  of  Cypress  trademarks,  visit  cypress.com.    Other  names  and  brands  may  be  claimed  as  property  of  their 
respective owners. 

 

 

 

 

Содержание MB96300 Series












Отзывы: