Hardware Setup
F
2
MC-16FX Family MB96300 Series Setup Guide, Doc. No. 002-06378 Rev. *A
10
Table 3-3. Jumper Settings on the Adapter Board (Short plug settings for analog power supply changeover
Jumper
Setting
Description
AVCC_IN
A-B side (default)
Select the analog power supply (AVCC) from the user system
A-C side
Select the analog power supply (AVCC), with an RC filter, from the user system
B-D side
Select the analog power supply (VDD) from the UVCC connector
C-D side
Select the analog power supply (VDD), with an RC filter, from the UVCC connector
AVCC_OUT
USR side (default)
Supply the power supply selected by AVCC_IN to the evaluation MCU analog power supply
(AVCC)
FLT side
Add an RC filter to the power selected by AVCC_IN and supply to the evaluation MCU
analog power supply (AVCC)
AVRH_IN
A-B side (default)
Select the analog power supply (AVRH) from the user system
A-C side
Select the analog power supply (AVRH), with an RC filter, from the user system
B-D side
Select the analog power supply (UVDD) from the UVCC connector
C-D side
Select the analog power supply (UVDD), with an RC filter, from the UVCC connector
AVRH_OUT
USR side (default)
Supply the power supply selected by AVRH_IN to the evaluation MCU analog power supply
(AVRH)
FLT side
Add an RC filter to the power selected by AVRH_IN and supply to the evaluation MCU
analog power supply (AVRH)
AVRL_IN
A-B side (default)
Select the analog power supply (AVRL) from the user system
A-C side
Select the analog power supply (AVRL), with an RC filter, from the user system
B-D side
Select the analog power supply (VDD) from the UVCC connector
C-D side
Select the analog power supply (VDD), with an RC filter, from the UVCC connector.
AVRL_OUT
USR side (default)
Supply the power supply selected by AVRL_IN to the evaluation MCU analog power supply
(AVRL)
FLT side
Add an RC filter to the power selected by AVRL_IN and supply to the evaluation MCU analog
power supply (AVRL)
AVSS_OUT
USR side (default)
Connect the analog power supply (AVSS) from the user system to the evaluation MCU
analog power supply (AVSS)
GND side
Connect the GND and evaluation MCU analog power supply (AVSS)
Table 3-4. Jumper Settings on the Adapter Board (Short plug settings for C pin supply)
Jumper
Setting
Description
C
USR side
Connect the capacitor on the user system to the C pin on the evaluation MCU
EML side (default)
Connect the capacitor on the adapter to the C pin on the evaluation MCU
Refer to the Instruction Manual for the Adapter MB2198-500 for details on settings of the adapter board.
