Installation of the Emulation System
FR Family FR81S Series, Emulation System, Doc. No. 002-04887 Rev. *A
14
Table 4-2. Cable Length and Communication Speed for Embedded Emulator MB210100-01-E
Cable length
Maximum permissible communication speed, Emulator side
2 m or less
25 Mbps
5 m or less
12.5Mbps
10 m or less
6.25 Mbps
4.1.3
General Specifications
In the following table the main specifications for the emulator are shown.
Table 4-3. Emulator specifications
Item
Specification
Name
Emulator
Part number
MB2100-01-E
Power supply
5V / 500mA (USB bus powered)
Debug interface bus communication
scheme
Single wire UART (NRZ or phase-modulated encoding).
The encoding scheme used is determined by the MCU.
Host computer communication scheme
USB 2.0 compliant
USB communication speed (theoretical
value)
480 Mbps (Hi-Speed),12 Mbps (Full-Speed)
Operating temperature
+5 °C to + 40 °C
Operating humidity
20 % to 80 % (no condensation)
Storage temperature
0 °C to +70 °C
Storage temperature
20 % to 80 % (no condensation)
External dimensions
84.8 (D) × 53.6 (W) × 21.3 (H) mm
(not including connectors, switches, or other protruding parts.)
Weight
70g
4.2
Connecting and installation of MB2100-01-E
The following steps have to be established for getting the embedded emulator MB2100-01-E.
Attention: The USB driver for Windows 7 operating system must be installed separately. The
USB drivers must be downloaded from
Please follow the instructions of the USB drive installation guide, before executing next steps
Installation Steps:
Pick up the USB cable which is packed with the emulator.
Plug in the mini-USB interface of the USB cable into emulator
