Preface
MB96670 Evaluation Board Operation Manual, Doc. No. 002-04759 Rev. *A
4
Caution of the product described in this manual
The following precautions apply to the product described in this manual.
WARNING
Indicates a potentially hazardous situation which could result in death or serious injury and/or
a fault in the user's system if the product is not used correctly.
Electric shock, Damage
Before performing any operation described in this manual, turn off all the power supplies to
the system.
Performing such an operation with the power on may cause an electric shock or device fault.
Electric shock, Damage
Once the product has been turned on, do not touch any metal part of it.
Doing so may cause an electric shock or device fault.
CAUTION
Indicates the presence of a hazard that may cause a minor or moderate injury, damages to
this product or devices connected to it, or may cause to loose software resources and other
properties such as data, if the device is not used appropriately.
Cuts, Damage
Before moving the product, be sure to turn off all the power supplies and unplug the cables.
Watch your step when carrying the product. Do not use the product in an unstable location
such as a place exposed to strong vibration or a sloping surface.
Doing so may cause the product to fall, resulting in an injury or fault.
Damage
Do not place anything on the product or expose the product to physical shocks. Do not carry
the product after the power has been turned on.
Doing so may cause a malfunction due to overloading or shock.
Damage
Since the product contains many electronic components, keep it away from direct sunlight,
high temperature, and high humidity to prevent condensation. Do not use or store the product
where it is exposed to much dust or a strong magnetic or electric field for an extended period
of time.
Inappropriate operating or storage environments may cause a fault.
Damage
Use the product within the ranges given in the specifications.
Operation over the specified ranges may cause a fault.
Damage
To prevent electrostatic breakdown, do not let your finger or other object come into contact
with the metal parts of any of the connectors. Before handling the product, touch a metal
object (such as a door knob) to discharge any static electricity from your body.
Damage
When installing the sub board, align the key positions of main board connector and sub
board connector, and fix with the screw set before use. When removing, remove all screws of
screw set, then remove the sub board vertically from the main board. Otherwise, the product
may be damaged, such as corruption of the connector section
.
Damage
Because the product has no casing, it is recommended that it be stored in the original
packaging. Transporting the product may cause a damage or fault. Therefore, keep the
packaging materials and use them when re-shipping the product.