Cypress F2MC-16FX Series Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 26

Cypress F2MC-16FX Series Скачать руководство пользователя страница 1

The following document contains information on Cypress products. The document has the series
name, product name, and ordering part numbering with the prefix “MB”. However, Cypress will
offer these products to new and existing customers with the series name, product name, and
ordering part number with the prefix “CY”.

How to Check the Ordering Part Number

1. Go to

www.cypress.com/pcn

2. Enter the keyword (for example, ordering part number) in the

SEARCH PCNS

field and click

Apply

.

3. Click the corresponding title from the search results.
4. Download the Affected Parts List file, which has details of all changes

For More Information

Please contact your local sales office for additional information about Cypress products and
solutions.

About Cypress

Cypress is the leader in advanced embedded system solutions for the world's most innovative
automotive, industrial, smart home appliances, consumer electronics and medical products.
Cypress' microcontrollers, analog ICs, wireless and USB-based connectivity solutions and reliable,
high-performance memories help engineers design differentiated products and get them to market
first. Cypress is committed to providing customers with the best support and development
resources on the planet enabling them to disrupt markets by creating new product categories in
record time. To learn more, go to

www.cypress.com

1
2
3
...
»

Содержание F2MC-16FX Series



























Отзывы:

Нет отзывов