Cypress EZ-BLE PRoC CYBLE-2120 0 Series, Руководство пользователя

Страница: 14 / 39

Document Number: 002-09764 Rev. *G Page 14 of 39
CYBLE-212019-00
CYBLE-212023-10
Electrical Specification
Table 7 details the absolute maximum electrical characteristics for the Cypress BLE module.
Table 7. CYBLE-2120XX-X0 Absolute Maximum Ratings
Table 8 details the RF characteristics for the Cypress BLE module.
Table 8. CYBLE-2120XX-X0 RF Performance Characteristics
Table 9 through Table 48 list the module level electrical characteristics for the CYBLE-2120XX-X0. All specifications are valid for
–40 °C

T
A

85 °C and T
J

100 °C, except where noted. Specifications are valid for 1.71 V to 5.5 V, except where noted.
Parameter Description Min Typ Max Units Details/Conditions
V
DDD_ABS
Analog, digital, or radio supply relative to V
SS
(V
SSD
= V
SSA
)
–0.5 – 6 V Absolute maximum
V
CCD_ABS
Direct digital core voltage input relative to V
SSD
–0.5 – 1.95 V Absolute maximum
V
DD_RIPPLE
Maximum power supply ripple for V
DD
and V
DDR
input voltage
– – 100 mV
3.0-V supply
Ripple frequency of 100 kHz
to 750 kHz
V
GPIO_ABS
GPIO voltage –0.5 – V
DD
+0.5 V Absolute maximum
I
GPIO_ABS
Maximum current per GPIO –25 – 25 mA Absolute maximum
I
GPIO_injection
GPIO injection current: Maximum for V
IH
> V
DD
and minimum for V
IL
< V
SS
–0.5 – 0.5 mA
Absolute maximum current
injected per pin
LU Pin current for latch up –200 200 mA –
Parameter Description Min Typ Max Units Details/Conditions
RF
O
RF output power on ANT –18 0 3 dBm
Configurable via register
settings
RX
S
RF receive sensitivity on ANT – –87 – dBm
Guaranteed by design
simulation
F
R
Module frequency range 2400 – 2480 MHz –
G
P
Peak gain – 0.5 – dBi –
G
Avg
Average gain – –0.5 – dBi –
RL Return loss – –10.5 – dB –
Table 9. CYBLE-2120XX-X0 DC Specifications
Parameter Description Min Typ Max Units Details/Conditions
V
DD1
Power supply input voltage 1.8 – 5.5 V With regulator enabled
V
DD2
Power supply input voltage unregulated 1.71 1.8 1.89 V
Internally unregulated
supply
V
DDR1
Radio supply voltage (radio on) 1.9 – 5.5 V –
V
DDR2
Radio supply voltage (radio off) 1.71 – 5.5 V –
Active Mode, V
DD
= 1.71 V to 5.5 V
I
DD3
Execute from flash; CPU at 3 MHz – 1.7 – mA
T = 25 °C,
V
DD
= 3.3 V
I
DD4
Execute from flash; CPU at 3 MHz – – – mA T = –40 °C to 85 °C
I
DD5
Execute from flash; CPU at 6 MHz – 2.5 – mA
T = 25 °C,
V
DD
= 3.3 V
I
DD6
Execute from flash; CPU at 6 MHz – – – mA T = –40 °C to 85 °C
I
DD7
Execute from flash; CPU at 12 MHz – 4 – mA
T = 25 °C,
V
DD
= 3.3 V
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.