CY4541 EZ-
PD™ CCG4 Evaluation Kit Guide, Doc. No. 002-10353 Rev. *E
7
2.
Introduction
The CY4541 EZ-PD
™ CCG4 Evaluation Kit (EVK) is based on the Cypress’s CCG4 dual port Type-C Power Delivery (PD)
controllers. EZ-
PD™ CCG4 is a dual USB Type-C controller that complies with the latest USB Type-C and PD standards. This
EVK is primarily intended to be a demonstration vehicle for Type-C PC designs that house one or two Type-C ports. CCG4 can
act either as a power provider (Source) or as a power consumer (Sink). The kit also helps to evaluate several features on two
Type-C ports, using a Dual Role Port (DRP) or SuperSpeed USB demo, and a DisplayPort demo.
2.1 Kit Contents
The CY4541 EZ-PD CCG4 EVK contains the following items:
▪
Two CCG EVK base boards assembled with one CY4541 CCG4 daughter card
▪
One 24-V DC power adapter*
▪
Two USB 3.0 Type-A to Type-B Cables
▪
Two USB Type-C to Type-A adapters
▪
One USB 3.0 EMCA (Electronically Marked Cable Assembly) Type-C cable*
▪
One USB 2.0 Type-A to Mini-B cable
▪
One set of jumper wires
▪
One screwdriver
▪
Quick Start Guide
Note
: *The CY4541 EZ-PD CCG4 EVK supports power up to 100 W (20 V, 5 A). The power adapter provided with the kit can
support only up to 2.7 A (at 24 V)
.
The USB 3.0 Type-C EMCA cable provided with the kit can support only up to 3 A.
2.1.1 Hardware Not Included With the Kit
The CY4541 EZ-PD CCG4 EVK does not come with all the hardware needed to perform the demonstrations documented in DRP
and SuperSpeed USB Demo. The following hardware is not included with this kit:
▪
A multimeter to measure voltage.
▪
Two USB pen drives for
.
▪
DisplayPort cables to connect the PC to the CCG EVK base board. If the PC has a Mini DisplayPort, then a Mini
DisplayPort to DisplayPort cable will be required.
▪
Type-C to DP adapters (
) to connect a display monitor to the CY4541 EZ-PD CCG4 EVK board,
which only has a DisplayPort interface.
▪
Display Splitter adapter (
for the kit to operate during the dual DisplayPort demonstration.
▪
A USB Type-C power adapter (
) for DRP kit operation. Dual Type-C port operation requires a USB
Type-C power adapter that supports a 14-V to 20-V power profile.
▪
A display monitor with DisplayPort (DP), HDMI, or VGA interface for the DisplayPort demonstration.
▪
A PC with two USB ports. USB 3.0 ports and Windows XP, or later operating system, is recommended.
Содержание CY4541 EZ-PD CCG4 Evaluation Kit
