CY3655 Hardware User Guide
4. Make sure the appropriate module supporting your specific enCoRe II or Wireless
enCoRe II device is in the memory-style DIMM slot of the Modular Programmer Base.
See the table below to find which module and which orientation of the module supports
your device. Note that the correct side of the module (A or B) must be connected to the
DIMM connector, and the module must be snapped properly in place.
5. Launch the PSoC Programmer application.
6. In the programming application, select the Port as the MiniProg. After selecting the
MiniProg, make sure in the “Results” column of the window that an unexpected firmware
version was not found. If necessary, update the MiniProg’s firmware by choosing
“Upgrade Firmware” in the “Utilities” menu.
7. First select the appropriate device family then select the device to be programmed.
8. Load the programming file using the “File Load” button.
9. Program.
Page 12 of 16
