© 2021 Cypress Solutions
Complete Manual: CTM-200 R2 (Revision 1.3)
25
Configuring the CTM-200
6.4
Configuring, Cellular Wireless Network Parameters
Cellular configuration is accessed by the “Cellular” select button on the left of the Web GUI.
For most devices, the following information is required:
•
An activated SIM card needs to be installed in the CTM-200.
•
The correct installed module must be selected
•
The mobile APN or Access Point Name.
•
In almost all cases, ‘Username’ and ‘Password’ can be left empty
Contact Cypress Solutions if the module you are trying to install is not shown in the drop down list on the Web
interface.
Enter the APN and select the embedded module name from the “Module” drop down list.
Press the “OK” button, “Save Configuration” to reboot the CTM-200.
After the device powers on the CTM-200 will have an IP address as shown in the “status” window.
