![Cypress CMPRO-U4H4CVE Скачать руководство пользователя страница 2](http://html.mh-extra.com/html/cypress/cmpro-u4h4cve/cmpro-u4h4cve_operation-manuals_2706006002.webp)
Introduction
The 4K2K 4 by 4 HDMI Matrix over CAT5e/6/7 supports the transmission of
video (resolutions up to 4K2K Full HD), multi-channel digital audio and
control via IR, RS-232, Telnet or WebGUI from four high definition sources
to four outputs over a single CAT5e/6/7 cable (up to 100m) for each output.
It supports high resolution digital audio formats such as LPCM 7.1CH, Dolby
TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content
that can be displayed when connecting a 3D TV and 3D source.
Additionally, the LAN connectivity will allow a 100BaseT network to be
served to smart TVs or games consoles. The Power over Cable (PoC)
function can power compatible Receivers, providing greater flexibility in
installations.
Applications
•
HDMI Matrix System
•
Video/TV wall display and control
•
Security surveillance and control
•
Commercial advertising, display and control
•
University lecture hall, display and control
•
Retail sales and demonstration
Features
•
HDMI, HDCP1.1 and DVI compliant
•
Supports HDMI 3D features
•
Supports resolutions VGA~WUXGA and 4K2K @50/60(YUV_420)
dependent upon the output display’s EDID settings
•
Supports distances up to 100 meters through CAT5e/6/7 cables
•
Supports 3D signal display dependent upon the output display EDID
settings
•
Supports HDMI input/output up to 10 meters at 8-bit/12-bit resolution
or 5 meters at 4K2K resolution
•
Supports bi-directional IR from input and output locations
•
Supports RS-232, remote control, on-panel control and IP Control
(Telnet & Web GUI)
•
1U size design
•
Supports external and internal EDID settings
•
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-
HD Master Audio transmission
Note:
1.
Do not connect the LAN/CONTROL port to CAT outputs of this
device.
2.
Do not connect more than one Ethernet/network link within the
Matrix system, doing so may tigger the device to shoot down.
3.
The PoC function is designed for powering compatible receiver units
only, non-PoC receivers will need their own power supply. Receivers
of another brand may not be compatible.