Cypress CLUX-H2SDI, Руководство по эксплуатации, Страница: 8 / 16

4
HDMI
TV/Monitor
1.Switch the dip switch to EDID update postion
2.Pressed on the EDID update button
consistently
(HDMI Cable)
CLUX-H2SDI
C. Connect the HDMI monitor or TV to the input port of CLUX-H2SDI and then
set the dip switch to EDID update position. Press the EDID update button
consistently until the Video Lock LED illuminate. In this step the device will
updating the monitor/TV’s EDID to replace the default setting.
CLUX-H2SDI
SDI Monitor
DVD Player
HDMI SDI
D. Finally, connect the HDMI source to the input port of CLUX-H2SDI and
output connect to SDI monitor which should allow image display.
2
. EDID Switch: Switching this switch to use the built-in or to update the
EDID. Default EDID as below:
3G EDID

Native Mode 1080p@60
HD EDID

Native Mode 1080i@60
EDID update / SD EDID

Native Mode720p@60
3
. EDID Update LED: This red LED will illuminate when EDID is being updating.
Detail in Section “EDID Update”.
4
. Video Lock LED: This yellow LED will illuminate when the input HDMI has
received the signal and locked it.
5
. HDMI/DVI LED: This green LED will illuminate when the input source is HDMI
signal and will not illuminate when the input is DVI signal.
6
. 3G LED: This red LED illuminate when the input HDMI signal is 1080p@50/60.
7
. HD LED: This yellow LED illuminate when the input HDMI signal is
1080p@24/25/30, 1080i@50/60 or 720p@50/60.
8
. SD LED: This green LED illuminate when the input HDMI signal is 480i/576i.
9
. 3G SDI Out 1 & 2: Connect output SDI display up to 2 for mirror displays or
with SDI to HDMI converter to cascade the signal as long as desired.