Cypress CLUX-H2SDI, Руководство по эксплуатации, Страница: 11 / 16

7
3. EDID switch mode / Default EDID setting:
3G

1080p@60
HD

1080i@60
Update / SD

720p@60
4. Due to HDMI’s default timing are mainly set on 480p but SDI does not
support such timing therefore, it is possible that the image will not dis
play. To avoid such event, it is suggested to set the source input equip
ment’s output timing on the “AUTO mode” for the source equipment
to send the EDID native timing of the display.
5. Only No. 4,5,12,16,20 & 24 needs to do EDID update. Detail informa
tion please refers to “EDID Update button”.
EDID Update LED Confirm Status
No.
EDID EDID Singal LED EDID Video HDMI
Description
Switch key 3G HD SD Update /Lock /DVI
1 Update Pressed On

● ●
  
3G Native, HDMI mode, Read OK
2 Update Pressed On ●

●
  
HD Native, HDMI mode, Read OK
3 Update Pressed On ● ●
   
SD Native, HDMI mode, Read OK
4 Update Pressed On ● ● ●
  
No support timing, HDMI mode, Read OK
5 Update Pressed On

● ●
 
● 3G Native, DVI mode, Read OK (Note4)
6 Update Pressed On ●

●
 
● HD Native, DVI mode, Read OK (Note4)
7 Update Pressed On ● ●
  
● SD Native, DVI mode, Read OK (Note4)
8 Update Pressed On ● ● ●
 
● EDID format error (Note5)
9 Update Pressed On ● ● ●

● ● No connection or connection error
Note: 1. "

" signal represent LED illuminate whereas "●" signal represent not
and "

" is blinking light.
2. Only when the EDID button is being pressed on consistently the EDID
update will progress and when the update is complete the Video
Lock LED will illuminate. If the button is not pressed the LED will
illuminate according to “System Operation LED Signal Status”.
3. HDMI source sending output resolution is base on receiver side’s
display monitor/TV’s EDID but different sources may have different
handling progress. The EDID update function is made to solve
compatibility issue.
4. When EDID read DVI mode the system will check if the EDID’s native
mode support SDI timing. If yes, the display will show according to
No. 5,6 & 7. If not, the system will automatically
copy default DVI’s EDID (Native 3G) mode and show as No.5 Format
5. EDID format error includes: Header error, Checksum error and EDID
error under this condition the default EDID or the updated will not be
change.