Operation Controls
and Functions
Front Panel
1. HDMI OUT 7/8/1:
Using HDMI cables connect these slots to displays
in order to show HDMI/3D content.
Note
: When the input signal contains 3D data the display must support 3D
content in order to display an image.
A.
This system was tested with 24AWG cables if using cables of another
type, the performance of this system may be different.
B.
Cable distance tested with a PS3 & 40” Samsung LED UA40B700 12
bits LCD TV.
C.
Figures provided in this manual are for reference only, actual figures
may depend on the source and display used along with the cables
specifications.
2. SYNC RED 3D ORG:
This LED will turn red when the input signal is
not in 3D. If the input signal is 3D then the LED will change to orange.
3. HDMI IN:
This slot connects with source devices such as DVD/Blu-
Ray players in order to receive an HDMI signal.
4. POWER LED & DC 5V:
This slot is where you plug the 5V DC power
supply into the unit and connect the adaptor to an AC outlet. The LED will
switch on when power is ON.
Rear Panel
1. EDID switch STD/TV:
This switch allows the user to choose the EDID
settings, the device must be turned on then off in order to make these
changes take effect. By switching to TV the device will read the EDID of
HDMI output 1 and will record it, then it will have the source send the
signal to the other seven HDMI outputs. The default setting is TV which
supports 3D content, leave as is when the display is working properly. By
switching to STD the device will use the built-in EDID, which is set at
Содержание CLUX-8M3D
Страница 1: ...1x8 HDMI v1 3 Splitter ID 15109 Operation Manual ...
Страница 5: ...Connection and Installation ...
