CY3280-MBR2 CapSense Express with SmartSense Auto-Tuning Kit Guide, Doc. # 001-71857 Rev. *C
25
Kit Operation
3.2.9
Power-On LED Effects
3.2.9.1
Enable Power-On LED Effects
Go to the
Visual Config
tab; select the
At Power On
checkbox under
LED Effects
to enable the
feature. Select the values for different parameters such as ramp up time, ramp down time, high time,
low time, high brightness, low brightness, and LED effect repeat rate in the
At Power On
tab.
Figure 3-17. Power-On LED Effects Enabled
3.2.9.2
Test CapSense Buttons with Power-On LED Effects Enabled
Observe the LED effects according to the configured setting at every power cycle.
Figure 3-18. Power-On LED Effect Pattern
Содержание CapSense Express SmartSense CY3280-MBR2
Страница 8: ...8 CY3280 MBR2 CapSense Express with SmartSense Auto Tuning Kit Guide Doc 001 71857 Rev C Introduction ...
Страница 44: ...44 CY3280 MBR2 CapSense Express with SmartSense Auto Tuning Kit Guide Doc 001 71857 Rev C A 2 3 Power Layer ...
Страница 45: ...CY3280 MBR2 CapSense Express with SmartSense Auto Tuning Kit Guide Doc 001 71857 Rev C 45 A 2 4 Ground Layer ...
