Cypress CapSense Express SmartSense CY3280-MBR2, Руководство пользователя

Страница: 17 / 48

CY3280-MBR2 CapSense Express with SmartSense Auto-Tuning Kit Guide, Doc. # 001-71857 Rev. *C 17
Kit Operation
Figure 3-3. Demonstration of SmartSense Auto-Tuning with Flex-PCB
SmartSense Auto-Tuning algorithm can also be tested on the Simple Button Module (BSM) board.
The BSM board can be connected to the kit and tested for SmartSense Auto-Tuning in the same
way as the Flex-PCB. BSM board is not provided as part of this kit. To purchase or know more about
BSM board, refer to the
Cypress website . The Flex-PCB needs to be disconnected from the kit to
test the features mentioned in the subsequent sections.
The following sections demonstrates how to enable and verify various visual and audio features of
the kit. These features require the kit to be configured using the EZ-Click customizer tool.
Follow the steps below to observe the features discussed in sections 3.2.2 to 3.2.10 .
a. Create a new project in the EZ-Click customizer tool by following the steps 1-7 in section 3.1.1 .
b. Modify the project to enable features explained in the following sections.