Cypress Semiconductor CY3215-DK, Руководство пользователя

Страница: 17 / 38

CY3215-DK PSoC 1 In-Circuit Emulator Development Kit Guide, Doc. # 001-66514 Rev. *B 16
Using ICE-Cube Connector
3.2 Connecting the ICE-Cube
PSoC Designer supports the ICE-Cube. This new in-circuit emulator replaces the ICE-4000 and the
USB adapter for seamless USB connection, debugging, and programming.
Figure 3-3. ICE-Cube
3.2.1 Connect using a USB Port
The ICE-Cube connects to any computer using a standard USB 2.0 cable, included in Cypress
development kits. To connect the ICE-Cube to your computer, plug the USB cable into your com-
puter and attach the other end to the ICE-Cube.
The ICE-Cube is a plug-and-play device and it should be recognized automatically by any computer
with PSoC Designer and PSoC Programmer installed. If USB connection problems occur, refer to
Microsoft Windows Help for troubleshooting Windows connectivity issues.
Figure 3-4. USB Port in ICE-Cube.
3.2.2 Connect using a Flex Cable
A flex cable is used to connect the ICE-Cube to the pod main board.
■
Pod: Pods connect to target circuits via foot. As each pod contains a fully functional PSoC bond-
out device, pods may be used instead of devices for test purposes. Simply plug a pod into the cir-
cuit without connecting it to an ICE base station. The pod power LED lights up when it is powered
and operational.