CYP RAX-PSU-12V, Руководство по эксплуатации

Страница: 8 / 20

8
6.2 Rear Panel
1
- +
2
- +
3
- +
4
- +
5
- +
6
- +
7
- +
8
FAN
- +
A B 12V
12V POWER OUT
SERV. CONTROL OFF
ON
-
+
DC 12V
1 2 3 4 5 6
1 12V POWER OUT & LEDs 1~8:
Connect power cables with 3.5mm
2-pin terminal blocks from units requiring 12V power. Up to 8 devices
can be powered. When power is available from a port, the associated
LED will be green. When a power port is disabled its LED will turn off.
2 12V FAN OUT A~B:
Connect to a dedicated dual-fan power and
control cable. Fan speed can be controlled via WebGUI, Telnet, or RS-
232.
3 SERV.:
This slot is reserved for firmware update use only.
4 CONTROL:
Connect directly, or through a network switch, to your PC/
laptop to control the unit via Telnet/WebGUI.
5 DC 12V: Plug the 12V DC power adapter into the unit and connect it
to an AC wall outlet for power.
6 ON/OFF:
Flip this switch to turn the unit ON or OFF after connecting
a 12V power source.