CYP RAX-PSU-12V, Руководство по эксплуатации

Страница: 14 / 20

14
6.4 RS-232 Control
Unit Controlling PC Serial Port Settings
Pin Definition Pin Definition Baud Rate
19200
1 1 Data Bits 8
2 TxD 2 RxD
Parity Bit
None
3 RxD 3 TxD
Stop Bits
1
4 4 Flow Control None
5 GND 5 GND
6 6
7 7
8 8
9 9
6.5 Telnet Control
Before attempting to use Telnet control, please ensure that both the unit
and the PC are connected to the same active networks.
To Access the Command Line Interface (CLI)
Windows 7 Click Start , type “cmd” in the search field, and press
Enter .
Windows XP Click
Start
>
Run
, type “cmd”, and press
Enter
.
Mac OS X Click
Go
>
Application
s >
Utilities
>
Terminal
.
Once in the Command Line Interface (CLI) type “ telnet ” followed by the
IP address of the unit (and the port number if it is non-standard) and then
hit “Enter”. See below for reference.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Adminstrator\telnet 192.168.1.50 23
Note: The unit’s default IP address is 192.168.1.50. If the IP address is changed
then the IP address required for Telnet access will also change accordingly.