26
COMMAND
Description and Parameters
set out N1 route N2
Set the routing of the specified output.
N1
= A ~ B
[Output port]
N2
= 1 ~ 2
[Input port]
get out N1 route
Show the routing for the specified output.
N1
= A ~ B
[Output port]
get in name list
List all input names.
get out name list
List all output names.
set out N1 auto mode N2
Set the automatic switching behavior of
the specified output.
N1
= A ~ B
[Output port]
Available values for
N2
:
0 [Off]
1
[Auto switch]
2
[Auto scan]
get out N1 auto mode
Show the currently selected automatic switching behavior of the
specified output.
N1
= A ~ B
[Output port]
get in N1 hactive
Show the detected horizontal active pixel total for input N1’s signal.
N1
= 1 ~ 2
[Input port]
Содержание PUV-2600RX
Страница 2: ......
