CYP PU-507TX-CVGA, Инструкции по эксплуатации, Страница: 8 / 21

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
PC CV
XGA
AUDIO
SERVICE
MENU ENTER
-
+
720P
INPUT
CV/PC
INPUT
2 3 4 5 6 8 9 1
7
1
SERVICE: Reserved for manufacturer use only.
2
IR Receiver window: Receives only the IR signal from the supplied
remote control for this device only.
3
PC:
Connect to a PC/Laptop source device with a D-Sub 15pin cable.
4
CV:
Connect to a composite video source such as a DVD/Video player.
5
AUDIO:
Connect to an analog stereo (L/R) audio source with a 3.5mm
mini-jack cable.
6
MENU:
Press this button to enter the On-Screen Display (OSD) menu.
7
INPUT (–) Button & CV/PC LED:
Press the INPUT (−) button to toggle
between CV or PC inputs. When in CV mode the LED will be lit, off
when in PC mode.
8
−/+:
Use these buttons to navigate down and up in the on-screen menu.
9
ENTER: Press this button to confirm the selection.
Note:
Pressing '−' (MINUS) and ENTER simultaneously will immediately switch
the output resolution of the device to 720p60.
Pressing '+' (PLUS) and ENTER simultaneously will immediately switch the
output resolution of the device to XGA (1024 × 768).