CYP PU-1109KIT, Руководство по эксплуатации, Страница: 9 / 16

9
6.2 Receiver
Power
Extender Blaster
IR 2 IR 1
RS232 Out
CAT5e/6 In
Link
LAN 1 LAN 2 LAN 3
HDMI Out
1 2 3 4 5 6 7
Front
Rear
8
1
Power LED:
The red LED will illuminate when the 24 V DC Adaptor is
connected to the AC outlet.
2
IR 1 Extender
: This slot is to connect with the IR receiver cables
included in the package for IR signal reception. The related IR
transmitter port is IR1 Blaster.
3
IR 2 Blaster:
Connect the IR blaster cables included in the package for
IR signal transmission. The related IR receiver port is IR2 Extender.
4
RS-232 Out:
Connect to a device that can be controlled (via D-Sub
9-pin female cable) by RS-232 commands.
5
Link LED:
This yellow LED will illuminate when the both CAT5e/6
input and output signal is connected.
6
CAT5e/6 IN:
Connect the transmitter and receiver via a single CAT5e/6
type cable for all data transmission.
7
HDMI Out:
Connect to a HDMI equipped TV or monitor to display the
HDMI input source signal.
8
LAN 1/2/3:
The LAN connections can be used to connect and share up
to 6 ethernet connections (3 at the receiver end, 3 at the transmitter
end), including computers, routers and media servers.