CYP OR-44VWC, Руководство по эксплуатации

Страница: 8 / 28

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER - +
1 INPUT 2 3 4 SAVE RECALL
A OUTPUT B C D LOCK
MATRIX/
DUAL/WALL
XGA
720P
MENU
2 1 3 4 5 9 10
8 7
1
IR Window: Accepts the IR signal from the supplied remote control.
2
Power: Press to turn the unit ON or to put it into standby mode.
Factory default: Press and hold the Power while connecting the power
supply to reset the system to the default settings.
3
MENU : Press this button to bring up the On-screen Display (OSD)
menu on screen.
Press the “MENU” button simultaneously with the "−" button to
immediately switch the output resolution to 720p@60Hz.
Press the “MENU” button with simultaneously “+” button to
immediately switch the output resolution to XGA (1024×768@60 Hz).
4
−/+ Buttons: Press these buttons to navigate down/up the OSD then
press the “MENU” button to confirm.
5
CHANNEL INPUT 1~4 and CHANNEL OUTPUT A~D:
Matrix mode:
i. Press the “Matrix/Dual/Wall” button to switch to Matrix mode. The
LED will stay lit when in this mode.
ii. Press an output from A~D and then press the corresponding input
(from 1~4). For example: press output A then press input 1, output
A will switch to input 1 and display the signal. The setting for each
output must be set individually.
Dual mode: Combines 2 sources to be presented on each of the HDMI
outputs (Dual A and Dual B).
i. Press “Matrix/Dual/Wall” button to switch to Dual mode. The LED will
turn off when in this mode.
ii. Press the "A" or "B" output buttons and then press the required
input (1 or 2). For example: press the output "A" button then press
the input 1 button, output A will display the video from input 1 on
the left side of the screen, then press the output "B" button and