CYP MOD-32, Руководство по эксплуатации

Страница: 8 / 32

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
PAGE
PAGE
R: STANDBY
FLASH: ALERT
RETURN
MENU
ALL
7
4
1
OUT/IN
8
5
2
0
9
6
3
+
LOCK
SAVE
RECALL
ENTER
6 8 7 9
4
2
3
1
12
11
10
13
5
1
LCM: Displays the setting information of each input/output and other
setting information according to the selected mode.
2
POWER button & LED: Press this button to turn the device ON or
press it again to put the device into standby mode. The LED will
illuminate when the unit is in standby mode.
Note: If the LED is flashing it means the temperature inside is too high and
air circulation may have been restricted.
3
RETURN: Press this button to return back or exit the current selection.
4
PAGE
▲▼◄►
: Use these buttons to cycle through the LCM’s options
for displaying the current I/O status or when entering into the settings
menu.
5
MENU: Press this button to enter the menu to change the following settings:
A. EDID
1. Standard Mode: Uses the built-in EDID settings that support video
up to 1080p@60/WUXGA@60RB and LPCM 2CH audio
2. Automatic Mode: Reads the EDID settings from the display
connected to the lowest numbered output port.
3. Manual Mode: Supports independent EDID settings by selecting
the input and output ports.