CYP DS-MSC14-4K, Руководство по эксплуатации

Страница: 8 / 38

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
4K UHD
POWER POWER
1X4 UHD TV WALL
CDPS-4KQ
1
1
POWER: Press the POWER button to power ON the unit or to set it to
standby mode.
When the power is disconnected, press and hold this button while
connecting the power supply to reset the system back to default
settings.
6.2 Rear Panel
HDMI OUT HDMI IN
D 1 C B A
CONTROL SERVICE RS-232 DC 12V
1 2 3 4 5 6
1
HDMI IN: Connect to an HDMI source device such as a DVD/Blu-ray
player and/or a PC/Laptop.
2
HDMI OUT A~D: Connect to HDMI TV/displays for display of the
output image. It is recommended that the connection sequence for a
TV wall set up should be as indicated in diagram opposite (Figure 1).
3
SERVICE: Reserved for manufacturer use only.
4
CONTROL: Connect the unit to an active network for telnet control
from a PC/Laptop. Using the “DS-MSC14-4K APP”* allows control of
multiple DS-MSC14-4K units (see Section 6.6 for details).
5
RS-232: Connect to a PC/Laptop or RS-232 control system with D-Sub
9pin cables for RS-232 control of the DS-MSC14-4K.
Note: RS-232 control system is limited to control of a single Video Wall
unit only.
6
DC 12V: Plug the supplied 12V DC power supply into the unit then
connect the adaptor to an AC outlet.
*Available from the downloads section of the product page on CYP
website (http://www.cypeurope.com)