CYP DS-MSC14-4K, Руководство по эксплуатации

Страница: 19 / 38

19
6.6 PC Application Control
NOTE: The PC Application Control software can be downloaded from the
'Downloads' section on the product page on the CYP website (http://www.
cypeurope.com).
Double click on the downloaded file to install the software. Once the
application has installed successfully, click and open the application.
1
1
Search MAC: Click on “Search MAC” to confirm how many TV Wall
unit(s) are within the network then, select from here with the unit you
wish to control.
Note: This action should be executed each time the unit is powered ON or
reset or the “DS-MSC14-4K ” application is run.
Select the unit that is to be adjusted then press “Connect” to connect
to that unit.
When the unit is connected successfully, a dialog will appear
showing “refresh completed” based on the selected MAC address.
the application will display the current unit’s status. However, image
display will not be refreshed automatically and can only be refreshed
manually.
When using more than 1 unit for a TV Wall setting, set up of the unit’s
ID number is required to ensure the correct display of each single TV
wall image.