CYP DCT-24, Руководство по эксплуатации

Страница: 9 / 16

4
6.2 Rear Panel
RS-232
LINE IN LINE OUT
DC 5V
USB
R L R L
1 2 3 4 5
1
DC 5V:
Plug the 5V DC power supply into the unit and connect the
adaptor to an AC outlet.
2
RS-232:
Connect 3.5mm D-Sub 9-pin adaptor cable to PC/Laptop for RS-
232 control.
3
USB IN:
• Connect to a PC/MAC source for USB audio signal input.
• Firmware update: Press Power wheel and then plug the 5V
DC power supply into the system, the system will enter into
firmware update mode.
4
Line IN:
Connect the L/R IN to an analog stereo input source such as CD
player or media player.
5
Line OUT:
Connect the L/R OUT to Amplifier or active speakers with RCA jack
cables.