9
6.7 Telnet Control
Before using the Telnet control, please ensure that both the Integrated
Zone Amplifier (via the 'CONTROL' port) and the PC/Laptop are
connected to the same active network.
To access the Telnet control in Windows 7, click on the 'Start' menu
and type "cmd" in the Search field then press enter.
Under Windows XP go to the 'Start' menu and click on "Run", type
"cmd" with then press enter.
In the Mac OS X Finder select Go
Applications
Utilities
Terminal
from the taskbar (See below for reference).
Once in the command line interface (CLI) type "telnet", then the IP
address and hit enter.
Note: The IP address of the Integrated Zone Amplifier can be
displayed on the unit's OLED monitor by navigating to the IP Config
option in the settings menu.
