8
COMMAND
DESCRIPTION
VOL S/0~-80
Output volume setting of 0~80db.
S=Show Volume, +=0.5db, ++=2db, -=-0.5db, --=-
2db or 0~-80db
MUTE S/0/1
Output volume mute control.
S=Status, 0=Unmute, 1=Mute
MICVOL S/0~30
Mic volume control 0~30db.
S=Show Volume, +=0.5db, -=-0.5db or 0~30db
MICMODE S/0~3
Mic mode select.
S=Status, 0=Off, 1=Normal, 2=Phantom, 3=Line
mode
FADEFAULT
Factory default setting.
REBOOT
Reboot the unit.
IPCONFIG
Print the IP configuration to the screen.
RESETIP
Reset the IP configuration to factory defaults.
SHOWMAC
Print the MAC address to the screen.
SHOWTPORT
Print the Telnet communication port to the
screen.
SHOWHPORT
Print the HTTP communication port to the screen.
SIPADD
Set the IP address.
SNETMASK
Set the Net Mask address.
SGATEWAY
Set the Gateway address.
SHTTPPORT
Set the HTTP communication port (1~62235)
[Default values=80].
STELNETPPORT
Set the Telnet communication port (1~62235)
[Default values=23].
Note: RS-232 commands will be not executed unless followed by a
carriage return. Commands are case-sensitive.
