CYP CSR-G6400, Руководство по эксплуатации

Страница: 9 / 28

4
6.4 Installation Instructions
Each rack chassis is shipped fully assembled. Installation of compatible
units only requires the removal of the 2 front locking panels and can be
performed while the chassis is installed in a rack. Installation of the Network
Switch Tray, Cooling Fan System, and DC Power Manager units can be
performed without any disassembly, however access to the top, bottom, and
sides of the rack chassis is required in order to secure them in place so it is
recommended to do so prior to placement within a rack.
6.4.1 Full/Half-Length Unit Installation
STEP 1
Unscrew the 3 thumbscrews holding the top locking panel in place, and
remove the panel from the front of the chassis. Unscrew the 3 thumbscrews
holding the bottom locking panel in place, and remove the panel from the
front of the chassis.
Note: The thumbscrews are connected to the locking panels with a retention
mechanism and will not come completely free when they have been
unscrewed from the chassis.