CYP CSR-8PSU-5V, Руководство по эксплуатации

Страница: 8 / 20

3
6.2 Rear Panel
- +
DC 12V SERV. CONTROL
FAN 5V POWER OUT
1
- +
2
- +
3
- +
4
- +
5
- +
6
- +
7
- +
8
- +
A B 12V
OFF
ON
1 2 3 4 5 6
1
5V POWER OUT & LEDs 1~8: Connect power cables with 3.5mm 2-pin
terminal blocks from units requiring 5V power. Up to 8 devices can
be powered. When power is available from a port, the associated
LED will be green. When a power port is disabled its LED will turn off.
2 12V FAN A/B: Connect to a dedicated dual-fan power and control
cable. Fan speed can be controlled via WebGUI, Telnet, or RS-232.
3
SERV.: This slot is reserved for firmware update use only.
4 CONTROL: Connect directly, or through a network switch, to your
PC/laptop to control the unit via Telnet/WebGUI.
5
DC 12V: Plug the 12V DC power adapter into the unit and connect
it to an AC wall outlet for power.
6
ON/OFF: Flip this switch to turn the unit ON or OFF after connecting
a 12V power source.