CYP CSR-8PSU-5V, Руководство по эксплуатации

Страница: 10 / 20

5
COMMAND DESCRIPTION AND PARAMETERS
REBOOT Reboot the unit.
PWR N1 N2 Enable or disable power output N1 .
N1 = 1 ~ 8 [Port number]
N2 = ON, OFF
PWR N1 NAME N2 Rename power output N1 .
N1 = 1 ~ 8 [Port number]
N2 = {Name String} [16 characters max]
PWR_STATUS N1 Show the current power state (volts, watts, amps)
of power output
N1 .
N1 = 1 ~ 8 [Port number]
TEMPERATURE Show details of the unit’s temperature and fan
control settings.
FAN_SET N1 Set non-“Auto Mode” fan speed or enable “Fan
Auto Mode”.
Available values for
N1 :
0 ~ 100 [Disable Fan Auto Mode
and set the fan speed to the
selected percentage]
AUTO [Enable Fan Auto Mode]
FAN_SET N1 N2 N3 Set the fan speed and temperature threshold for
the selected automatic speed tier.
Available values for
N1 :
AUTO_LOW [Auto fan setting to adjust]
AUTO_MID
AUTO_HIGH
N2 = 0 ~ 100 [Temperature threshold in
°C]
N3 = 0 ~ 100 [Fan speed in percent]
Note: Commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive.