CYP CSC-103TXPL, Руководство по эксплуатации

Страница: 9 / 36

4
6.2 Rear Panel
PC 2 PC 1 LINE IN MIC IN SERVICE IR OUT IR IN RS232
COM PORT
LINE OUT
CAT5e/6/7 OUT HDMI OUT HDMI 2 HDMI 1 DISPLAY PORT
INPUT CONTROL
C 1 2 3 4 5
CONTROL
OFF
ON
PHANTOM
PC 2 PC 1
DC 24V
13
15 1 2
3 4 5 6 7 8 9 10 11 12 14
1
HDMI IN 1~2: Connect to HDMI source equipment such as a media
players, game consoles or set-top boxes.
DisplayPort IN: Connect to DisplayPort source equipment such as a
PC or laptop.
PC IN 1~2: Connect to VGA source equipment such as a PC or
laptop. YUV sources, such as DVD players, are also supported
with the use of a 15-pin to 3-RCA adapter when the port has the
"COMP IN" mode turned on in the OSD.
2
HDMI OUT: Connect to an HDMI TV, monitor or amplifier for digital
video and audio output.
CAT5e/6/7 OUT: Connect to a compatible, 24V PoC supporting,
HDBaseT Receiver for remote video and audio output.
3
SERVICE: This slot is reserved for firmware update use only.
4 LINE OUT: Connect to powered speakers or an amplifier for stereo
analog audio output.
5
MIC IN: Connect a microphone for direct audio input. Phantom
power mics are supported.
6 PHANTOM/OFF/ON: Set the switch to “ON” for condenser mics (5V)
or “PHANTOM” for professional 48V phantom power mics. When
the switch is set to “OFF” the MIC input will be muted.
7
LINE IN: Connect to the stereo analog output of a device such as
a CD player or PC. This audio will be used in place of the HDMI/DP
audio when “external” audio is selected in the OSD menu.
8 PC 1~2: Connect to the stereo analog output of the device
connected to the associated VGA input port.