CYP CSC-103TXPL, Руководство по эксплуатации

Страница: 10 / 36

5
9 IR OUT: Connect to the provided IR Blaster to transmit IR signals to
devices within direct line-of-sight of the IR Blaster.
10
IR IN: Connect to the provided IR Extender to extend the IR control
range of remotely located devices. Ensure that the remote being
used is within direct line-of-sight of the IR Extender.
11 RS-232: Connect to a PC, laptop or other serial control device
for the extension of RS-232 signals to the connected HDBaseT
Receiver.
12
INPUT CONTROL: This terminal block is used for direct source input
selection. Short the ground pin (marked as “C”) with any one
of the following pins to make an individual source selection (Pin
1=HDMI IN 1, Pin 2=HDMI IN 2, Pin 3= DisplayPort IN, Pin 4=PC 1, and
Pin 5= PC 2).
13
COM PORT: Connect directly to a PC, laptop or other serial control
device to send RS-232 commands to control the unit.
14
CONTROL: Connect directly, or through a network switch, to your
PC/laptop to control the unit via Telnet/WebGUI.
15
DC 24V: Plug the 24V DC power adapter into this port and connect
it to an AC wall outlet for power.