CYP CPT-387HD, Руководство по эксплуатации

Страница: 8 / 12

3
6.2 Rear Panel
OUT HD Bypass
Under
Scan
Video
S-Video
Pr Pb Y PAL
Over
Scan NTSC
1 2 3 4
1
Under Scan/Over Scan Switch
Switch to adjust the output image to underscan or overscan on
the display in order to view the full image.
2
PAL/NTSC Switch
Switch to change to PAL or NTSC system according to suit the
display system. The device will also perform the auto phase
adjustment after switching.
3
Video/S-Video OUT
Connect to a display with a Composite Video or S-Video cable for
simultaneous output of the SD signal.
4
YPbPr HD Bypass
Connect to a display with Component Video (YPbPr) cables for
simultaneous output of the Component signal.
Note: In standby mode the Component bypass function will
continue to operate.
OUT HD Bypass
Under
Scan
Video
S-Video
Pr Pb Y PAL
Over
Scan NTSC
1 2 3 4