CYP CPLUS-V8PT, Руководство по эксплуатации

Страница: 8 / 44

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
GROUP 2 1
IN
GROUP IN 2 IN 1
MENU ENTER + -
UHD+ 2X8 HDMI SPLITTER
IN 1
GROUP 1
OUT A OUT B OUT C OUT D
2 1 3 4 5 7 6
1
IN LEDs: The behavior of these LEDs depend on if Group Mode has
been enabled or not.
A Group Mode Off
IN 1~2: The illuminated LED indicates which source is currently
selected.
GROUP: This LED will remain off.
B
Group Mode On
IN 1~2: These LEDs will illuminate to indicate that a live source
has been detected on the associated input port. If no source is
detected the LED will remain off.
GROUP: This LED will illuminate.
Note: When the front panel is locked, all 3 LEDs will blink after any
button press.
2
MENU: Press to enter the OSD menu, or to back out from menu
items.
Note: Press and hold the “MENU” button for 3 seconds while
connecting the power supply to reset all settings to the factory
defaults.
3
− & IN 1: Press to move down or adjust selections within OSD
menus. When not in the OSD menu, press this button to switch to
Input 1.
Note: Pressing “MENU” and “−” together will force Input 1 to use
the Internal “FHD, 2CH” EDID.
4
+ & IN 2: Press to move up or adjust selections within OSD menus.
When not in the OSD menu, press this button to switch to Input 2.
Note: Pressing “MENU” and “+” together will force Input 2 to use
the Internal “FHD, 2CH” EDID.