CYP CP-255I, Руководство по эксплуатации

Страница: 9 / 24

4
6.2 Rear Panel
HDMI OUT
AUX IN RS-232 PC IN
HDMI IN
PC IN
R
Cr/Pr
L
Cb/Pb
CO-AX
Y
R
R
L
CV
DC 5V
L SV
CO-AX OUT
1 2
3 6 8
4 5 7 9
1
HDMI OUT and COAX OUT: Connect the HDMI OUT port to an HDMI
display such as HDTV or monitor. Connect the COAXIAL OUT port
(TOSLINK) to an amplifier for separate digital audio output.
2
HDMI IN and AUX IN: Connect the HDMI IN port to an HDMI source
device such as a DVD player or set-top box or connect to a DVI
source equipment such as a PC with an HDMI to DVI cable. Use
the AUX IN port to input the audio signal when the video signal
input through the HDMI IN port is an DVI source.
3
RS-232: Connect to a PC/Laptop or RS-232 control system to use
RS-232 commands to control the device.
4
PC IN and Audio IN: Connect the D-sub 15-pin port to a PC for
video signal conversion. Connect the 3.5mm phone jack port to
the PC for audio signal conversion.
5
YCbCr/YPbPr IN and L/R IN: Connect the YCbCr/YPbPr input ports
(3 RCA) to source equipment such as a DVD player or set-top box
for video signal conversion. Connect the L/R audio input ports to
source equipment for audio signal conversion.
6
COAX IN: The COAXIAL port provides the digital audio input
support, and can be assigned to any of the video inputs. Once
connected, it can be assigned in the OSD Menu under Audio
Source Selection by selecting between Coaxial (S/PDIF) or other
audio source (see section '6.4 OSD Menu' for reference).
7
S-Video IN and L/R IN: Connect the S-Video input port to
source equipment such as a DVD player or set-top box for vido
signal conversion. Connect the L/R audio input ports to source
equipment for audio signal conversion.