CYP CP-255I, Руководство по эксплуатации

Страница: 10 / 24

5
8
Composite Video IN and L/R IN: Connect the Composite Video
input port to source equipment such as a DVD player or Set-top
box for video signal conversion. Connect the L/R audio input ports
to source equipment for audio signal conversion.
9 DC 5V: Plug the 5 V DC power supply into the unit and connect the
adaptor to AC wall outlet.
6.3 Remote Control
1
POWER: Press the button once to power on
the unit. Press again to enter standby mode.
2
INPUT: Press the button repeatedly to toggle
through various input sources.
3
HD, PC, HDMI/DVI: Press the appropriate
button to directly select component video,
PC, or HDMI/DVI input.
4
VGA, SVGA, XGA, SXGA, UXGA or 480p,
720p, 1080i, 1080p: Press appropriate button
to directly select the preferred output
resolution. Other output resolutions that
are not covered by these buttons can be
selected from the OSD Menu.
5
MENU: Press the button to bring up the OSD
main menu page.
6
EXIT: Press the button to exit from a sub
menu or main menu.
7
Up, Down, Left, Right and OK: Press the Up/Down button to move
the highlight bar to your desired parameter during the OSD
operation. Press the Left/Right button to increase/decrease the
value of a selected parameter.Press the OK (ENTER) button to
confirm your selection.
8
AUTO ADJUST: Press the button to optimize the positioning of the
picture (picture centering) on the screen.
9
RESET: Press the button to reset the unit's firmware setting to the
factory default value.
2
4
6
9 8
7
5
1
3