CYP CMLUX-88S, Руководство по эксплуатации

Страница: 10 / 20

⑤
LOCK: Press this button to lock all the functions and press it again to
release the lock. When LED turns Green, the lock is activated and when it
turns red the key lock has been released.
⑥
ENTER: Press this button after each and every selection to confirm the
setting. If this button is not pressed after 20 seconds the selection will be
cancelled.
⑦
ALL: Press this button to set all the outputs to display with the same input.
After pressing the All button press an input number and then press enter to
confirm the selection.
⑧
MEMORY: Press this button to choose your six pre-set settings. First press
the setting number, and when all the input/outputs are being set, be
sure to press MEMORY to record it into the system. The factory default
settings are 1.12345678, 2.87654321, 3.11223344, 4.55667788, 5.11221122,
6.33443344.
⑨
RECALL: Select this button in order to retrieve your six pre-set settings, then
press enter to confirm your selection.
⑩
OUT A~H & IN 1~8: Press the output source selection button in order to
choose which input port corresponds to the desired output port. First
select your output port from A-H, wait 2 sec, then choose the desired
input port from ports 1-8, pressing enter will confirm your setting. Each
output selection only allows a single input setting each time.
6