CYP CLUX-1HLR, Руководство по эксплуатации

Страница: 23 / 48

18
1) Unit Information and Details: This section displays all of the relevant
position, dimension, and orientation details of the selected unit/
display.
Note: Only one unit’s details will be displayed if multiple units are
currently selected.
■ ID: The ID number of the currently selected unit/display.
■ Dimensions: Displays the current values for the pixel position
of the top/left corner of the un-rotated display as well as the
current width and height in pixels. After changing any of these
values, press the enter key to commit the change to the layout.
Note: If the bezel values are set to 0, the height and width
values should only be the measurement of the video panel
within the display. However, if bezel values are being used,
these dimensions represent the size of the entire physical
display (including the bezel).
■ Keep Aspect Ratio: Enabled or disables forcing the current
aspect ratio to be maintained when the display is resized either
by typing a new value, or by mouse-dragging a corner of the
display in the layout.
■ Angle: Displays the current rotation angle of the selected
display in degrees. After changing this value, press the enter
key to commit the change to the layout.
■ Bezel: Displays the current bezel measurements, in pixels, for
the selected display and allows for their modification. The bezel
is represented in the layout by a darkened rectangle around