CYP CLUX-1HLR, Руководство по эксплуатации

Страница: 22 / 48

17
The Unit information area on the left shows all of the relevant details
of the currently selected display. You may freely reposition or resize
any of the displays by simply clicking on them and dragging them
around the layout space, or by typing numbers directly into the Unit
information area. If bezel measurements are to be used, the display
width/height measurement should be the total measurement of the
screen plus the bezel. After arranging the layout to approximately
match the arrangement of the real displays, select all of the units
involved in the video wall from the “Unit” section at the top of the
window and then click on the “Set” button in the Unit information
section to upload the new layout configuration to all selected
units. After clicking “Set”, the units will take a few seconds to fully
update with the new configuration. In most cases it will take multiple
adjustment and tweaking passes to perfectly match the physical
layout.
It is recommended to periodically save the modifications that have
been made to the current layout by right clicking on the layout and
selecting “Update”. This will save the changes to the layout, so that
they are not lost if you close the software, or change to another
layout.
Note: Making changes to a layout and then switching to a new layout
without updating the layout will cause those changes to be lost.