manualshive.com logo in svg

CYP CH-2535RX, Руководство по эксплуатации

Поделиться
Скачать
CYP CH-2535RX Скачать руководство пользователя страница 60

55

•   Information

Displays the HDBaseT link state, operational mode, Receiver firmware 

version and serial number.
•   

Relay

Click to open (OFF) or close (ON) the relays located on the Receiver.
•   

Resolution

Dropdown menus allowing for the selection of the output resolution, 

and aspect ratio behavior, of the Receiver’s HDMI output. Selections 

are enacted immediately.
•   

Audio

Provides control over the analog audio output on the Receiver. Click 

the Mute switch to enable or disable analog audio output. Move the 

Volume slider to control the analog output volume.

Note: Digital audio output via HDMI cannot be adjusted.

•   Firmware  Upgrade

Provides a way to update the Receiver’s firmware. Click “Choose File” 

to select the firmware update file from the local PC (*.bin format). 

After selecting an appropriate file, click the “Upgrade” button to 

begin the update process.
•   

Scaler

 

This section provides slider controls for brightness, contrast, saturation, 

hue, and sharpness allowing adjustment to the HDMI output on the 

Receiver. Clicking the “Scaler Reset” button will restore all of these 

scaler settings back to the factory default.

Содержание CH-2535RX

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды