CYP CH-2535RX, Руководство по эксплуатации

Страница: 6 / 88

1
1. INTRODUCTION
This new collaboration Transmitter and Receiver system is a convenient
turnkey solution for video selection and extension in conference
rooms, classrooms and showrooms. These units provide not only AV
conversion and extension but also an intelligent and easy way to
control devices throughout the entire venue. The three most common
input interfaces (HDMI, DisplayPort, and VGA) are supported by
the Transmitter, providing the ultimate in source compatibility and
flexibility. The HDMI and DisplayPort inputs both support resolution/
timing up to a maximum of 4K@60Hz (4:4:4, 8-bit) which is converted,
as appropriate, for transmission over HDBaseT. The selected source
can be transmitted over Cat.6/7 cable up to 70m (at 4K@60Hz). The
Receiver can scale the HDBaseT video source, or local HDMI input, to
match the connected display’s resolution requirements.
The Transmitter also provides an interface for a remote control keypad,
or trigger interface, which can be easily installed within a podium or
within a table in a conference room or classroom. This interface can
allow the user to control a wide range of devices by activating single
commands or complex macros and sending commands out over the
local network. In order to provide a more robust selection of control
options, the Receiver also supports 2 relay connections, providing
instant control over projector screens, curtains, lights, etc. The unique
macro programmability allows for the implementation of multiple
command activations from a single button press. These units are
controllable via top panel controls (with OSD), WebGUI, Telnet, and
RS-232.
2. APPLICATIONS
• Conference room display
• Classroom display
• Showroom display